Rlide R2 Series - Page 87

85
7.7.2 Edit Horizontal Alignment Data
In the process of defining horizontal alignment, editing is available.
Straight
02
AZ:
20°00’00”
Len:
10.000m
Strt
End
Prev
Next
Soft keys:
[Strt]: Go to the beginning of the file, and displays the first alignment data.
[End]: Go to the end of the file, and displays the last alignment data.
[Prev]: Display the previous point data.
[Next]: Display the next point data.
It is possible to edit data by using the function keys above. After entering the data to be edited, press [ENT]
to record the edited data and enter to the inputting screen of next point. To quit without saving data, press
[ESC].
STEP
OPERATION
DISPLAY
a.
In HZ Alignment select “Edit HZ AL”.
[2]
HZ Alignment
1.
Define HZ AL
2.
Edit HZ AL
3.
Receive HZ AL
4.
Delete HZ AL
b.
Screen displays the start point data.
Press [Next] softkey to find the alignment
data needed to edit.
[Next]
Start Pt
01/05
CH:
10.000
N:
10.000m
E:
10.000m
End
Next
c.
Input the new data and press [ENT].
Input new data
+
[ENT]
Straight
02/05
AZ:
30°00’10”
Len:
10.000m
Strt
End
Prev
Next
d.
Screen displays the modified new data.
Press [Prev] or [Next] to view and modify
other data.
Straight
02
AZ:
30°00’10”
Len:
15.000m
Strt
End
Prev
Next