Rlide R2 Series - Page 88

86
7.7.3 Receive HZ AL
STEP
OPERATION
DISPLAY
a.
In HZ Alignment select “Receive HZ AL”.
[3]
HZ Alignment
1.
Define HZ AL
2.
Edit HZ AL
3.
Receive HZ AL
4.
Delete HZ AL
b.
Press [Comm] to set communication
parameter, making the parameter
consistent with the setting in
communication software.
If not transmit, press [Abrt].
Press [▲]/[▼] to move cursor to each
parameter, press [ ]/[ ] to select
options of each item. After finishing
setting, press [ENT].
[Comm]
Receive HZ AL
Abrt
Comm
Strt
Press [Comm ]
<Comm>
Baud:
1200
Data.L:
8
Parity:
None
Stop:
1
c.
After setting, press [Strt] to receive.
[Strt]
Receive HZ AL
Receive………
Stop
d.
After receiving data, the program quit
automatically, and returns to HZ
Alignment menu.
7.7.4 Delete Horizontal Alignment Data
The horizontal alignment data in internal memory can be deleted. Operation is shown below.
STEP
OPERATION
DISPLAY
a.
In HZ Alignment select “Delete HZ AL”.
[4]
HZ Alignment
1.
Define HZ AL
2.
Edit HZ AL
3.
Receive HZ AL
4.
Delete HZ AL