Roche Diagnostics May 2009
G-10 Service Manual · Version 9.0
8 Versions cobas b 221 system
Service Manual
Version 6.0
B-41 Replacing MSS measuring chamber: procedure modified
B-53 Cuvette holder connections: new figure
B-76 Valves measuring chambe cartridge: figure changed
B-78 Valves sample distributor: figure changed
B-85 Mainboard unit: new figure
B-86 Sample sensor board: new figure
B-86, B-90, B-94 Compatibility chart and cross references new
B-90 Polychromator bilirubin code: procedure modified
B-101 Software update with USB mass storage new
B-108 Barcodescanner new
B-115 AutoQC preparation for maintenance new
D-3 General information new
D-12 System stops, module stops, system warnings, value flags modified
D-88 USB troubleshooting new
D-95 Vacuum system test modified
D-92 Aggregates: T&D needle calibration modified
D-96 Control sensors: sample sensors new
D-102 General fluidics test modified, new fluidics graphics
D-115 Stability monitor modified
D-126 Sensor limits (sensor report) modified
E Glossary updated
G-5 Versions: Software versions added, revisions changed to versions
G-9 Version history: updated
Part–Page Modification / Addition
Ta b le G - 12
Version Nr. Date of Release Modified Chapters Applicable from Software Version
6.0 March 2006 see below 5.00
Ta bl e G -1 3
Part–Page Modification / Addition
Title page Replaced by cobas title page
cobas information page Information page: new
Table of contents Updated
Version, Date Update: Version 6.0, March 2006
All parts and pages Roche OMNI S replaced by cobas b 221 system
All parts "cover" corrected to "top cover"
B-6 Instrument type: table and warning: new
B-66 Replacing the docking mechanisms S2 and S3 (fluid packs): step 5 modified
B-87 Figure B-64: updated
D-11 Error 10003: modified
Ta b le G - 14
To Next Page
Loading...
