standards and directives listed in the previous chapter.
Environmental conditions
Protection class: IP20
Ambient temperature (operation): +5 ... +40°C
Humidity (non-condensing): 0 ... 95
Ambient temperature (storage) -25 ... +85°C
Safety and warning information
● Read the operating instructions before putting the device into operation and using it for the
rst time.
● The safety and accident prevention regulations applicable in the specic individual case
must be applied.
● Before switching on the controller, make sure that the operating voltage specied on the
device corresponds to the supply voltage.
● Proper and safe operation of the product requires proper transport, storage, installation
and assembly as well as careful operation and maintenance.
● Do not use a damaged controller.
● Switch o the device immediately if it shows noticeable deviations from normal operation.
● Rocketronics.de guarantees the proper function of the device only if no changes are made
in mechanics, electronics and software.
● The opening of the device as well as adjustment, maintenance and repair work may be
carried out only by appropriately trained technical personnel.
● The controller may only be used for the purpose described in this operating manual. Any
other use is considered improper. The manufacturer is not liable for any resulting damage.
The risk for this is borne solely by the user.
● The controller may only be put into operation when it has been established that the complete
machine into which the controller is to be installed complies with the provisions of the EU
Machinery Directive as amended.
9
To Next Page
Loading...