Rockwell Automation 2198-C4015-ERS User Manual

132 Rockwell Automation Publication 2198-UM005C-EN-P - February 2022
Chapter 6 Configure and Start up the Kinetix 5300 Drive System
24. Click the tab corresponding to the Motor Test you want to run.
For information about each of the tests, see Motor Tests and Autotune
Procedure on page 214.
25. Click Start.
26. Click Accept Test Results.
27. Click Apply.
28. Select the Autotune category.
29. Repeat step 1
through step 29 for each induction motor axis.

Rockwell Automation 2198-C4015-ERS Specifications

General

Brand	Rockwell Automation
Model	2198-C4015-ERS
Category	Servo Drives
Language	English