Instrument Functions
NRP2
142User Manual 1173.9140.02 ─ 07
Setup Name
Names or renames the selected memory space. A letter panel opens after pressing the
associated softkey.
Remote command:
MEMory:STATe:MAP on page
252
Save
Saves the current settings under the selected name. After the settings are stored suc-
cessfully, the dialog box closes automatically.
Former settings saved in this memory space are overwritten.
Another way to save the settings and close the dialog box is to press the ↵MENU key.
Remote command:
*SAV on page 204
4.6.3
Loading user-defined settings
The "Recall Setup" dialog box in the "File" menu is used to load stored settings.
Fig. 4-68: Recall Setup dialog box
Select setting
Selects a setting.
Recall
Loads the selected setting. After the settings are loaded successfully, the dialog box
closes automatically.
The same effect can be achieved by pressing the ↵MENU key.
Remote command:
*RCL on page 198
4.6.4
Loading settings for mobile radio standards
Predefined settings for the most common mobile radio standards can be loaded in the
"Recall Standard" dialog box of the
"File" menu for quick configuration of the different
measurement modes.The name of the set standard appears in the title bar of all open
windows and is treated like any other window name ( chapter 4.6.6, "Assigning names
Management of settings
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
