Rohde & Schwarz NRP2 - Page 238

Remote Control - Commands
NRP2
235User Manual 1173.9140.02 ─ 07
 











N
i
i
xx
N
1
2
2
1
1

Fig. 6-6: Standard deviation
σ of all measured values
The unit is the current unit of the measured result.
Possible Units: W | DBM | DBUV | DPCT | DB | O
Usage: Query only
CALCulate<[1]..4>:STATistics:MARKer: HORIzontal:POSition[:X][:POWer]
<power>
Is available with statistics measurements (CCDF and PDF). It sets the horizontally
shiftable marker on the power axis. The absolute position is specified. The statistics
measured value can then be read out with CALC:
STAT:MARK:
HOR:DATA? if the mea-
surement at this position has a valid value.
Parameters:
<power> float_value, units: DBM | DBUV | W
Default unit: DBM
CALCulate<[1]..4>:STATistics:MARKer:HORizontal:DATA?
Is available with statistics measurements (CCDF and PDF). It returns the value of the
statistics function at the position of the marker if the value is valid.
Unit: O
Usage: Query only
CALCulate<[1]..4>:STATistics:MARKer:VERTical:POSition[:Y] <position>
Is available with statistics measurements (CCDF and PDF). It sets the vertically shifta-
ble marker on the statistics axis. The associated value on the power axis can then be
read out with CALC:STAT:MARK:
VERT:DATA? if such a value is available.
Unit: O
Parameters:
<position> float_value
CALCulate<[1]..4>:STATistics:MARKer:VERTical:DATA[:POWer]?
Is available with statistics measurements (CCDF and PDF). It returns the absolute
position of the marker on the power axis.
Unit: DBM
CALCulate (Configuration of Calculate Blocks)
北京海洋兴业科技股份有限公司（证券代码：839145）
电话：010-62176775
网址：www.hyxyyq.com