Instrument Functions
NRP2
94User Manual 1173.9140.02 ─ 07
"Dig"
The digital display mode shows the measured value numerically.
Additional information on the active settings is provided, e.g. signal
frequency, sensor mode, trigger mode, etc.. For a description of the
used symbols see chapter 3.6.2, "Special symbols", on page 58.
"D&A"
The hybrid digital & analog display mode shows the measured value
on an analog scale and numerically.
Displaying measurement results
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
