Reference Manual
00809-0100-4809, Rev DA
Appendix A: Specifications and Reference Data
September 2015
99
Specifications and Reference Data
19. Materials of Construction comply with metallurgical requirements within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
20. Not available with M20 or G
1
/2 conduit entry size.
21. Not available with housing code 7J.
22. Not available with output code X. Only available with Measurement Type D.
23. Not available with output code F, option code DA2, or option code QT.
24. See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson
™
Process Management
representative for additional information.
25. Not available with Housing code 5A, 5J, or 7J. External ground screw assembly (option code D4) is included with the T1 option. The T1 option is not needed
with FISCO Product Certifications.
26. Includes Hardware Adjustments (option code D1) as standard. Not available with output code X. Only available with Measurement Type D.
27. Requires Rosemount Engineering Assistant version 5.5.1 to configure.
28. -58 °F (50 °C) for Measurement Type 1-7.
29. Not available with output code F.
30. Not available with housing codes 2E, 2F, 2G, 2M, 5A, 5J, or 7J.
31. This assembly is included with options E1, N1, K1, ND, E4, E7, N7, K7, E2, E3, KA, KC, KD, IA, IE, N3, T1, EM, and KM.
32. Not available with Housing code 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe; Nonincendive (option code I5) or FM
FISCO Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009.
To Next Page
Loading...
Need help?
General
