6
Reference Manual
00809-0100-4809, Rev DA
Section 2: Installation
September 2015
Installation
2.4 Installation flowchart and checklist
Figure 2-3 is an installation flowchart that provides guidance through the installation process.
Following the figure, an installation checklist has been provided to verify that all critical steps
have been taken in the installation process. The checklist numbers are indicated in the
flowchart.
Figure 2-3. Installation Chart
Start
Unpack instrument
Review product manual
Verify proper installation location Steps 1, 2
Hazardous
location?
Yes
Yes
Yes
No
No
No
No
Step 3
Step 4
Step 5-9
Step 11-14
Bench
configure?
Review Appendix B
See appropriate transmitter manual
for bench configuration information
Verify model
indicated on tag
Remote
mounted
transmitter
Install hardware
Install transmitter
Install flowmeter
Wire
Remote
mounted
electronics?
Commission the transmitter. See appropriate
transmitter manual for bench configuration
information.
Finish
To Next Page
Loading...
Need help?
General
