Rotax 912 Series Service Manual

76-00-00
page 2
May 01/2007
Effectivity 912/914 Series
Edition 1 / Rev. 0
d02626
BRP-Rotax
Maintenance Manual
3.1.2) Static check of the turbocharger control ..........................76-00-00 / 32
3.1.2.1) Turbo control unit (TCU) .............................................76-00-00 / 32
3.1.2.2) Caution lamps ............................................................. 76-00-00 / 34
3.1.2.3) Wiring harness ............................................................ 76-00-00 / 35
3.1.2.4) Throttle potentiometer ................................................76-00-00 / 37
3.1.2.5) Resistance thermometer (Intake air
temperature sensor) ...................................................76-00-00 / 42
3.1.2.6) Pressure sensors........................................................76-00-00 / 44
3.1.2.7) Servo motor................................................................76-00-00 / 50
3.1.2.8) Circuit breaker for servo motor...................................76-00-00 / 52
3.1.2.9) Three-way solenoid valve............................................76-00-00 / 53
3.2) Wiring diagrams ............................................................................76-00-00 / 54
3.2.1 Engine external (on the 914 Series) .................................76-00-00 / 54
4) Form Sheets ............................................................................................76-00-00 / 55

Rotax 912 Series Specifications

General

Redline	5800 rpm
TBO	2000 hours
Displacement	1211 cc
Bore	79.5 mm
Stroke	61 mm
Power Output	80 hp (59.6 kW)
Compression Ratio	9.0:1
Fuel Type	Avgas 100LL
Ignition System	Dual electronic ignition
Fuel System	Fuel Injected
Oil System	Dry sump
Engine Type	4-cylinder, horizontally opposed, 4-stroke