Rotax 912 Series Service Manual

Effectivity 912/914 Series
Edition 1 / Rev. 0
71-00-00
page 15
May 01/2007
d02621
BRP-Rotax
Maintenance Manual
4) Treatment of corrosion and surface damage
In the case of long standstill times, a rust film may form on various metal parts. Severely
or heavily corroded screws, nuts, washers, bearings, bushes etc., must be replaced.
4.1) Propeller shaft
The flange should be lightly greased to prevent surface rust forming,
see 72-00-00 / sec. 3.9.10.
4.2 Electric system
See 74-00-00 / sec. 3.1.

Rotax 912 Series Specifications

General

Redline	5800 rpm
TBO	2000 hours
Displacement	1211 cc
Bore	79.5 mm
Stroke	61 mm
Power Output	80 hp (59.6 kW)
Compression Ratio	9.0:1
Fuel Type	Avgas 100LL
Ignition System	Dual electronic ignition
Fuel System	Fuel Injected
Oil System	Dry sump
Engine Type	4-cylinder, horizontally opposed, 4-stroke