Rotax 912 Series - 3 Maintenance; Removal of the Fly Wheel Hub

BRP-Rotax
Maintenance Manual
Effectivity 912/914 Series
Edition 1 / Rev. 0
72-00-00
page 9
May 01/2007
d02622
3) Maintenance
The following sections describe maintenance procedure for engines of the 912/914
Series above and beyond the maintenance and special checks, see latest issue
Maintenance Manual (Line Maintenance) for the respective engine type, 912 Series or
914 Series, and the systems descriptions given hitherto. The description is divided into
subsections and descriptions of the function of the various systems.
3.1) Removal of the fly wheel hub
See Fig. 72-3
Remove hex. screw M16x1.5 (1). Place protection piece part no. 877410 on the
crankshaft, screw puller part no. 877375 down fully and press off the fly wheel
hub (2) with the hex. screw.
Fig. 72-3
00344
1
2