Rotax 912 Series Service Manual

Effectivity 912/914 Series
Edition 1 / Rev. 0
78-00-00
page 5
May 01/2007
d02627
BRP-Rotax
Maintenance Manual
2.4) Connections for instrumentation
■ CAUTION: Consult also the relevant sections on connections for
instrumentation in the latest Installation Manual.
2.4.1) Exhaust gas temperature display (optional)
The exhaust gas temperature is monitored by means of 4 sensors on
the exhaust manifold. The temperature display device is connected via
NiCrNi control lines.
On 912 Series: The manufacturer of the exhaust system must attach
or provide the connections M8x1 for installation of the
metalsheathed thermocouples, part no. 966370, in the
exhaust bends.
On 914 Series: The connection thread M8x1 for attachment of the
metalsheathed thermocouples, part no. 966370, are
already provided in the exhaust bends.

Rotax 912 Series Specifications

General

Redline	5800 rpm
TBO	2000 hours
Displacement	1211 cc
Bore	79.5 mm
Stroke	61 mm
Power Output	80 hp (59.6 kW)
Compression Ratio	9.0:1
Fuel Type	Avgas 100LL
Ignition System	Dual electronic ignition
Fuel System	Fuel Injected
Oil System	Dry sump
Engine Type	4-cylinder, horizontally opposed, 4-stroke