Rotax 912 Series - Temperature- and Pressure Observation

71-00-00
page 22
May 01/2007
Effectivity 912/914 Series
Edition 1 / Rev. 0
d02621
BRP-Rotax
Maintenance Manual
6.2) Temperature- and pressure observation
Engines of the 912 Series and 914 Series are equipped with two tempera-
ture control points on the cylinder heads for the coolant, one temperature
control point for the oil temperature and a pressure control point for the oil
pressure.
On engines of the 914 Series: The engine is also equipped with control
points for measurement of the airbox pressure, airbox temperature and the
ambient pressure.