Rotax 912 Series Service Manual

76-00-00
page 26
May 01/2007
Effectivity 914 Series
Edition 1 / Rev. 0
d02626
BRP-Rotax
Maintenance Manual
- Data display
See Figs. 76-19, 76-20, 76-21, 76, -22 and 76-23.
HISTORY_BUFFER: A subprogram for reading, displaying
and printing of the data stored in the TCU.
Fig. 76-21 shows that 8 control parameters
are displayed. The recording takes place at 6
minute intervals, whereby the highest value of
each period will be stored.
00200
00199
READ_DATA: Reads data such as serial number, time of
operation and the latest transmitted engine
data from the storage in the TCU. When 100
% is reached, the reading is complete.
◆ NOTE: If this command is carried out during creation
of a LOG file, the failure message “SERIAL
ACCESS DENIED” will appear. In this case,
repeat the reading procedure.
Fig. 76-19
Fig. 76-20

Rotax 912 Series Specifications

General

Redline	5800 rpm
TBO	2000 hours
Displacement	1211 cc
Bore	79.5 mm
Stroke	61 mm
Power Output	80 hp (59.6 kW)
Compression Ratio	9.0:1
Fuel Type	Avgas 100LL
Ignition System	Dual electronic ignition
Fuel System	Fuel Injected
Oil System	Dry sump
Engine Type	4-cylinder, horizontally opposed, 4-stroke