Rotax 914 series Maintenance Manual

These technical data and the information embodied therein are the property of BRP-
Rotax GmbH&Co. KG, Austria, acc, BGBI 1984 no. 448, and shall not, without prior
written permission of BRP-Rotax GmbH&Co. KG, be disclosed in whole or in part to third
parties. This legend shall be included on any reproduction of these data, in whole or in
part.
Copyright 2007 © - all rights reserved.
ROTAX
®
is a trade mark of BRP-Rotax GmbH&Co. KG. In the following document the
short form of BRP-Rotax GmbH&Co. KG = BRP-Rotax is used.
Other product names in this documentation are used purely for ease of identification and
may be trademarks of the respective company or owner.
Approval of translation has been done to best knowledge and judgement - in any case
the original text in german language is authoritative.
Before starting any maintenance work, please read the Maintenance Manual completely
as it contains important safety relevant information.
WARNING

Rotax 914 series Specifications

General

Bore	79.5 mm
Stroke	61 mm
Compression Ratio	9.0:1
Cooling System	Liquid-cooled cylinder heads, air-cooled cylinders
Redline	5800 rpm
Engine Type	4-cylinder, 4-stroke
Fuel Type	Avgas 100LL
Oil System	Dry sump
Fuel System	fuel injection
TBO (Time Between Overhauls)	2000 hours
Displacement	1.211 liters (1211 cc)
Power Output	84.6 kW (115 hp) at 5, 800 rpm