EasyManuals Logo

Rotax 914 series Maintenance Manual

Rotax 914 series
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #264 background imageLoading...
Page #264 background image
74-00-00
page 16
May 01/2007
Effectivity 912/914 Series
Edition 1 / Rev. 0
d02624
BRP-Rotax
Maintenance Manual
3.7) Generator coils
See Fig. 74-12.
If the generator does not work, the reason may be a defective or damaged yellow
alternator cable or a defective winding on the 8 alternator coils (3). Disconnect
alternator cables (yellow) and check resistance values.
â—† NOTE: If the value measured corresponds with the values specified, the
cause may be a defective rectifier-regulator.
â–  CAUTION : When performing any of the work described here, ensure that
no foreign objects can enter the ignition unit.
Measure the resistance with a multimeter. See 74-00-00 sec. 3.12 and
74-00-00 sec. 5.

Table of Contents

Other manuals for Rotax 914 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rotax 914 series and is the answer not in the manual?

Rotax 914 series Specifications

General IconGeneral
Bore79.5 mm
Stroke61 mm
Compression Ratio9.0:1
Cooling SystemLiquid-cooled cylinder heads, air-cooled cylinders
Redline5800 rpm
Engine Type4-cylinder, 4-stroke
Fuel TypeAvgas 100LL
Oil SystemDry sump
Fuel Systemfuel injection
TBO (Time Between Overhauls)2000 hours
Displacement1.211 liters (1211 cc)
Power Output84.6 kW (115 hp) at 5, 800 rpm

Related product manuals