Rotax 914 series Maintenance Manual

79-00-00
page 10
May 01/2007
Effectivity 912/914 Series
Edition 1 / Rev. 0
d02628
BRP-Rotax
Maintenance Manual
2.4) Magnetic plug
See the corresponding Maintenance Manual (Line Maintenance) for the respec-
tive engine type, 912 Series or 914 Series.
2.5) Drain plug
See the corresponding Maintenance Manual (Line Maintenance) for the respec-
tive engine type, 912 Series or 914 Series.
2.6) Connections for instrumentation
■ CAUTION: Consult also the relevant section in the Installation Manual.
2.6.1) Oil pressure indication
Via an electric resistance pick-up attached on oil pump housing with
connection to indicating instrument.
2.6.2) Oil temperature indication
The sensor for the oil temperature is fitted in the oil pump housing. The
sensor is a thermo switch with changing internal resistance according
to oil temperature.

Rotax 914 series Specifications

General

Bore	79.5 mm
Stroke	61 mm
Compression Ratio	9.0:1
Cooling System	Liquid-cooled cylinder heads, air-cooled cylinders
Redline	5800 rpm
Engine Type	4-cylinder, 4-stroke
Fuel Type	Avgas 100LL
Oil System	Dry sump
Fuel System	fuel injection
TBO (Time Between Overhauls)	2000 hours
Displacement	1.211 liters (1211 cc)
Power Output	84.6 kW (115 hp) at 5, 800 rpm