EasyManuals Logo

Rotax 914 series Maintenance Manual

Rotax 914 series
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
Effectivity 912/914 Series
Edition 1 / Rev. 0
71-00-00
page 17
May 01/2007
d02621
BRP-Rotax
Maintenance Manual
5) Preservation and returning to service
5.1) Storage and preservation directives for a new engine
BRP-Rotax as the manufacturer of the engine warrants corrosion protection of
aircraft engines of the 912 /914 Series for at least 12 months from date of
delivery by BRP-Rotax.
This warranty confirmation is subject to the following conditions:
- The engine must be stored in the original packing as supplied by BRP-Rotax.
- The protective covers must not be removed.
- The engine must be stored in a suitable place (closed area, clean and dry).
If the engine is stored longer than 12 months, the following inspections must be
carried out every 3 months:
- Remove one spark plug on each cylinder and turn crankshaft by hand 2 full
turns. Refit spark plug.
- Visual inspection for rust formation (e.g. on propeller shaft). If rust formation
is detected, the engine must be sent immediately to an authorized overhaul
facility for inspection.
â–² WARNING: The engine must not be taken into operation.
â—† NOTE: The maximum possible storage period of the engine is limited to
24 months.
If this period is exceeded, the engine must be sent to an ROTAX authorized
overhaul facility for inspection.

Table of Contents

Other manuals for Rotax 914 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rotax 914 series and is the answer not in the manual?

Rotax 914 series Specifications

General IconGeneral
Bore79.5 mm
Stroke61 mm
Compression Ratio9.0:1
Cooling SystemLiquid-cooled cylinder heads, air-cooled cylinders
Redline5800 rpm
Engine Type4-cylinder, 4-stroke
Fuel TypeAvgas 100LL
Oil SystemDry sump
Fuel Systemfuel injection
TBO (Time Between Overhauls)2000 hours
Displacement1.211 liters (1211 cc)
Power Output84.6 kW (115 hp) at 5, 800 rpm

Related product manuals