Rotax 914 series Maintenance Manual

76-00-00
page 2
May 01/2007
Effectivity 912/914 Series
Edition 1 / Rev. 0
d02626
BRP-Rotax
Maintenance Manual
3.1.2) Static check of the turbocharger control ..........................76-00-00 / 32
3.1.2.1) Turbo control unit (TCU) .............................................76-00-00 / 32
3.1.2.2) Caution lamps ............................................................. 76-00-00 / 34
3.1.2.3) Wiring harness ............................................................ 76-00-00 / 35
3.1.2.4) Throttle potentiometer ................................................76-00-00 / 37
3.1.2.5) Resistance thermometer (Intake air
temperature sensor) ...................................................76-00-00 / 42
3.1.2.6) Pressure sensors........................................................76-00-00 / 44
3.1.2.7) Servo motor................................................................76-00-00 / 50
3.1.2.8) Circuit breaker for servo motor...................................76-00-00 / 52
3.1.2.9) Three-way solenoid valve............................................76-00-00 / 53
3.2) Wiring diagrams ............................................................................76-00-00 / 54
3.2.1 Engine external (on the 914 Series) .................................76-00-00 / 54
4) Form Sheets ............................................................................................76-00-00 / 55

Rotax 914 series Specifications

General

Bore	79.5 mm
Stroke	61 mm
Compression Ratio	9.0:1
Cooling System	Liquid-cooled cylinder heads, air-cooled cylinders
Redline	5800 rpm
Engine Type	4-cylinder, 4-stroke
Fuel Type	Avgas 100LL
Oil System	Dry sump
Fuel System	fuel injection
TBO (Time Between Overhauls)	2000 hours
Displacement	1.211 liters (1211 cc)
Power Output	84.6 kW (115 hp) at 5, 800 rpm