EasyManuals Logo

Rotax 914 series Maintenance Manual

Rotax 914 series
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
00-00-00
Effectivity 912/914 Series
Edition 1 / Rev. 0
page 35
May 01/2007
d02620
BRP-Rotax
Maintenance Manual
14 899788 LOCTITE 648 green,
heavy-duty screw locking agent ......................................5 ml
15 897186 SILICONE HEAT CONDUCTION COMPOUND .......... 150 g
Application of the heat conduction compound will reduce
heat transfer resistance. The greaselike, temperature-
resistant silicon compound fills cavities between compo-
nents and cooling elements (e.g: spark plug - cylinder
head), which otherwise do not contribute to heat conduc-
tion.
16 297710 PU-glue
for shock absorption ...................................................310 ml
17 n.e. Multipurpose grease LZ
Generally usable, neutrally colored multipurpose grease,
water resistant and highly adherent. Usable for tempera-
tures from -35 °C to +120 °C (-31 °F to 248 °F) and can be
subjected to high mechanical loads.
18 n.e. Preservation oil MobilArma 524
Preservation oil, insoluble in water, on a hydrocarbon basis
with additives. The pour point is below -18 °C ( -3 °F).
19 n.e. Flexible web for surface finishing 3M Scotch-Brite Multi
Flex - very fine or ultra fine
Is sold by the meter and used for manual removal of
smaller rust spots or oxidation, especially for optimum
ground connections. It is particularly suitable for removing
LOCTITE from surfaces or threads to make them metallic
clean. Before re-applying LOCTITE, clean surfaces with
nitrothinner or degreasing agent (CASTROL ZA 30 or OMV
- SOFT SOL). When using solvents, observe the safety
regulations for persons and the environment.
20 898570 Screw securing paint
seals screws .................................................................20 ml

Table of Contents

Other manuals for Rotax 914 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rotax 914 series and is the answer not in the manual?

Rotax 914 series Specifications

General IconGeneral
Bore79.5 mm
Stroke61 mm
Compression Ratio9.0:1
Cooling SystemLiquid-cooled cylinder heads, air-cooled cylinders
Redline5800 rpm
Engine Type4-cylinder, 4-stroke
Fuel TypeAvgas 100LL
Oil SystemDry sump
Fuel Systemfuel injection
TBO (Time Between Overhauls)2000 hours
Displacement1.211 liters (1211 cc)
Power Output84.6 kW (115 hp) at 5, 800 rpm

Related product manuals