Rotax 914 series Maintenance Manual

BRP-Rotax
Maintenance Manual
Effectivity 912/914 Series
Edition 1 / Rev. 0
72-00-00
page 3
May 01/2007
d02622
3.16) Piston and cylinder assembly fitting .............................................72-00-00 / 86
3.16.1) Hydraulic valve tappets fitting ..............................................72-00-00 / 86
3.16.2) Pistons fitting .......................................................................72-00-00 / 86
3.16.3) Cylinders fitting ....................................................................72-00-00 / 90
3.16.4) Cylinder head fitting .............................................................72-00-00 / 92
3.17) Intake manifold and compensation tube assembly ......................72-00-00 / 95
4) Wear limits ..............................................................................................72-00-00 / 97
5) Form Sheets ...........................................................................................72-00-00 / 117
5.1) Form sheet for material testing ROTAX 912/914 Series ............... 72-00-00 / 117
5.1.1) Inspection on cracks............................................................. 72-00-00 / 117
5.1.2) Hardness test .......................................................................72-00-00 / 117

Rotax 914 series Specifications

General

Bore	79.5 mm
Stroke	61 mm
Compression Ratio	9.0:1
Cooling System	Liquid-cooled cylinder heads, air-cooled cylinders
Redline	5800 rpm
Engine Type	4-cylinder, 4-stroke
Fuel Type	Avgas 100LL
Oil System	Dry sump
Fuel System	fuel injection
TBO (Time Between Overhauls)	2000 hours
Displacement	1.211 liters (1211 cc)
Power Output	84.6 kW (115 hp) at 5, 800 rpm