Rotax MMH-912 Series - 3.11.2) Reworking of the sealing surface to the exhaust manifold

BRP-Rotax
Maintenance Manual
Effectivity 912/914 Series
Edition 1 / Rev. 2
72-00-00
page 61
July 01/2008
d04351
3.11.2) Reworking of the sealing surface to the exhaust manifold
See Fig. 72-63.
Reworking is permissible if there is a leak at the sealing surface (1) to
the exhaust manifold.
If a rework is necessary, the cylinder head must be sent to a ROTAX
authorized overhaul facility for overhaul.
Fig. 72-63
08244
1