rotork CK Series User Manual

Keeping the World Flowing
3
7.2 Parameters viewed and set by
DP-V1 Communication 45
7.2.1 Actuator Tag Data (Parameter 20) 47
7.2.2 Software Versions
(Parameter 21 and 22) 47
7.2.3 Field Interface Type (Parameter 24) 47
7.2.4 Permit GSD Parameterisation
(Parameter 25) 47
7.2.5 Control Outputs (Parameter 26 to 29) 47
7.2.6 Configure Data Exchange
(Parameter 40) 47
7.2.7 Parameterisation Date (Parameter 68) 45
7.2.8 Function for indication Contacts
S1 – S8 (Parameters 78-81 and 86-89) 48
7.2.9 Position Trip for indication Contacts
S1 – S8 (Parameters 82-85 and 90-93) 49
7.2.10 ESD Parameters (Parameter 97 - 101) 49
7.2.11 Interlock enable (Parameter 102) 49
7.2.12 Open Limit position (Parameter 103) 49
7.2.13 Interrupter Timer parameters
(104 – 108) 49
7.2.14 Language used (Parameter 109) 49
7.2.15 IDs and notes (Parameters 111 - 120) 49
8 Setting Up And Maintaining the
Profibus Module 50
8.1 Using a Network Configuration Tool 50
8.1.1 FDT (Field Device Tool) 50
8.1.2 PDM (Process Device Manager) 50
8.2 Accent- Actuator Configuration Tool 51
8.3 Setting up the network address in the PFU 51
8.4 Setting up a Centronik with the Setting Tool 51
8.5 Setting up the remote source in a CK actuator
with the Setting Tool 53
8.6 Maintenance and Repair 53
8.7 Records 54
Contents
Section Page Section Page
7 Parameters 39
7.1 Parameters set by GSD and DP-V1
Communication 39
7.1.1 Limited Range Position Minimum
and Maximum (Parameter 1 and 2) 41
7.1.2 Deadband and Hysteresis
(Parameter 3 and 4) 41
7.1.3 Motion Inhibit Timer (Parameter 6) 42
7.1.4 Manual Movement Travel
(Parameter 7) 42
7.1.5 Valve Jammed Time (Parameter 8) 42
7.1.6 Watchdog Timeout (Parameter 9) 42
7.1.7 Action on Loss of Comms
(Parameter 10) 42
7.1.8 Comms Lost Position (Parameter 11) 42
7.1.9 Comms Fault Timer (Parameter 12) 42
7.1.10 Auxiliary Input Mask (Parameter 13) 43
7.1.11 ESD DI-4/Net Disable (Parameter 14) 44
7.1.12 Redundancy FR/SR Mode and
Simple/RedCom Mode (Parameter 15) 44
7.1.13 Part Stroke Position (Parameter 16) 44
7.1.14 Part Stroke Limit and Timeout
(Parameter 17) 44
7.1.15 Actuator type (Parameter 18) 44
A4US
US
A4
US A4
US
A4
A4 US
US
A4
US
A4
A4 US

rotork CK Series Specifications

General

Brand	rotork
Model	CK Series
Category	Controller
Language	English