Main functions
100
Ocean 2014 User's Manual
2014-06-02/3.2A
Add display - Modify current real-time display
Use this button if you want to add or delete displays in your real-time display template.
Auto new row - Select if you want to add new rows automatically
If you have Display license level, this checkbox is always checked.
If you have Connect or Professional license level, you have the ability to create real-time display
templates with a specific number of rows pre-defined. When you use a real-time display template,
just make your measurements and when you wish to stop, uncheck this box and no further rows will
be created.
These functions are used
when editing a Session or
Test template.
Detector - Select or change the detectors to be used
When you click the Detector button, the detector selection dialogue will be shown and you may
select any detector you have in the list to be used with your template. Read more about this in the
topic Detector selection.
Protection - Add protection to templates
A session or real-time template template can be protected from modification. Read more on this in
topic Protection.
Check ID-s - Check for duplicated IDs
A session or real-time template template can be protected from modification. Read more on this in
topic Locate data during import and export.
This function is to add or change
analyses in the current test template.
Setup - Add/modify analysis in the current test template
Use this button if you wish to add an analysis to your test template, or if you want to change the
current analysis to something else. Read more about this in the topic Analysis (Definitions).
Translate - Translate analysis texts
This button is to translate analysis texts if Ocean is used with more than one language.
To Next Page
Loading...
