Main functions
114
Ocean 2014 User's Manual
2014-06-02/3.2A
6. When you are ready click on OK.
7. You can now see the imported site information in the database (Measurements).
The import is done "by name", if you repeat the import existing data will be overwritten (no duplicates
are created).
4.7.2.2 Import from oRTIgo
If you are using oRTIgo you can import the sites (facilities, rooms, generators and tubes) you have in
oRTIgo into Ocean. Since Ocean is a much more powerful tool with many more capabilities than oRTIgo
was, we made the decision not to import old oRTIgo templates and measurements. We designed Ocean
to be very user-friendly and you will find it will take a very short time to re-design any template to meet
your measurement requirements that will give you the results oRTIgo gave and much more besides.
Follow the steps below to import your data from oRTIgo:
1. Go to the Help page on the ribbon bar.
2. Click on the button "Import from Ortigo".
To Next Page
Loading...
Need help?
General
