27
Quick Check
2014-06-02/3.2A
Ocean 2014 User's Manual
2.4 Change Meter Settings
There are several ways to change meter settings. All meter settings are available if you click on the
"Meter adjust" button:
When you click on the button the Meter settings are shown:
There are also some short cuts to change some of the set values. You can click (or tap) on the kV range
indication at the bottom to change kV range:
When you click or tap here, a menu is shown that allows you to quickly select a different kV range.
When you measure on mammography you might want to change calibration and/or status for the
To Next Page
Loading...
