Quick Check
18
Ocean 2014 User's Manual
2014-06-02/3.2A
1. Press the power button and keep it pressed until the screen shows the following:
2. Release the button and slide the panel down to shut down the Tablet.
2.2 First measurement with Quick Check
By default, Quick Check is launched automatically when Ocean 2014 starts and the meter is available.
Use Quick Check when you just want "a meter" to do a quick measurement. Quick Check is extremely
simple to use since it automatically recognizes what type of meter you have and which detectors you
use. It is full plug-and-play, directly when you unplug or plug in a detector; Quick Check sets up the
measurement for you. You can save data you measure with Quick Check but you must save manually -
Quick Check will never ask you if you want to save. It is also possible to print and export measured data
to Excel. Quick check also has built-in applications for accuracy, linearity, reproducibility, half-value layer
and more. Quick check is designed for use with a tablet and easy to operate directly on a touch screen.
Let us start with a simple measurement to illustrate how to use Quick Check. This example assumes a
Piranha 657. If you have another model follow this example and apply it on what you see on your screen
when you use your Piranha.
Make sure your meter is powered on and within distance for Bluetooth communication or connected via
USB. Disconnect any external probe that might be connected (unless you have a Piranha model that only
works with external detector). Assume that we are using a Piranha 657.
1. Start Ocean 2014 or start the Quick Check from the Measure tab on the ribbon bar if you are in Ocean
2014 main view:
(Note: If you use Windows 8; you start Ocean 2014 from the desktop)
To Next Page
Loading...
Need help?
General
