33
Quick Check
2014-06-02/3.2A
Ocean 2014 User's Manual
2.6 Save a measurement
Quick Check will not ask you if you want to save your data, you must yourself decide if you want to save.
Click on the Save button in case you want to save your measured data.
When you click on the Save button you are asked to enter a name for your data. Your data will be saved
in the "Quick Check" folder in the Measurement database.
Once you have saved your data the first time, Quick Check will ask you before it discards any data.
2.7 Open an old measurement
You can re-open a Quick Check measurement that you have saved. You can open it if you want to
continue to measure or if you want to print it. From Ocean 2014 you can also open a Quick Check
measurement in off-line mode (no meter connected) to review or print the measurement.
To open a Quick Check measurement:
1. Click on Measurement tab.
2. Go to the "Quick Checks" folder, double-click on the measurement you want to re-open.
You can also open a Quick Check measurement as an Real-time display in Ocean 2014 if you want to
modify it. To open as a real-time display:
1. Open the measurement folder.
2. Right-click on the Quick Check measurement you want to open as a real-time display.
To Next Page
Loading...
Need help?
General
