Use Quick Check when you just need to
make a quick measurement. Quick Check
automatically adapts to the meter you use
and the detector you have connected. It
is fully plug-and-play and any change you
do is automatically detected and Quick
Chick adapts to the new situation. Quick
Check is designed for a tablet (touch
screen) but works of course also on a
standard laptop. You can do the following
with Quick Check.
Quick measurements
Save
Print
Export to Excel
Applications with analysis
2.1 Start the Tablet
This is a quick introduction to how you get started with the tablet that comes with your meter. The
tablet has Windows 8 and is configured and ready to be used with the meter.
To start measuring:
1. Power on the meter.
2. Power on the Tablet.
3. Windows 8 starts and the Start screen is launched.
To Next Page
Loading...
Need help?
General
