Ocean 2014 - Main screen
48
Ocean 2014 User's Manual
2014-06-02/3.2A
Lower status bar
The lower status bar (Status bar #2) is divided into five sections:
Section #1 (left) shows which meter currently is used
Section #2 shows what you are working on currently
Section #3 shows which working mode you are in currently ("Log mode" is shown when you are
recording data and "Design mode" is shown when you are creating/modifying a template)
Section #4 shows the battery status for the connected meter
Section #5 shows the title of the object you are working with currently
Section #6 shows if you are connected to Ocean Central
IMPORTANT!
Design mode: If you are working in Design mode, no measured data is saved when you click the save
button. Only the (empty) template is saved in this mode.
Log mode: If you are in Log mode, everything is saved including the measured data.
3.3 Database browser
All your data, measured sessions, measured real-time displays and templates, are stored in the database.
The database is divided into two main parts, Measurements and Library. In Measurements are measured
sessions and real-time displays stored and in the Library are templates stored.
You can browse through your measurements and templates buy clicking on the two tabs Measurements
and Library:
Click on Measurements to browse the measurements:
To Next Page
Loading...
Need help?
General
