31
Quick Check
2014-06-02/3.2A
Ocean 2014 User's Manual
3. Chose an application, for example kVp Accuracy. The screen layout is different for the application
compared to a standard Quick Check measurement. In this case there are no displays only grid (exposure
list) is shown. There is also an analysis that perform some kind of calculation (in this case kVp accuracy) on
your measured data.
4. You can modify set values in the grid (exposure list). Click in a cell to change set values. For example,
you may want to change the kVp set value for exposure #4 from 80 to 81 kV.
5. Now make the exposures.
To Next Page
Loading...
Need help?
General
