Quick Check
38
Ocean 2014 User's Manual
2014-06-02/3.2A
4. Next you have to chose destination. You can chose a new workbook or one you already have on your
computer. In this case select "New workbook".
Excel starts and an empty workbook is loaded.
5. Activate the cell, for example B5, where you want measured data to start.
6. Make a couple of exposures.
7. Measured data are transferred to Excel for each Exposure. You can use the minimize Ocean 2014
window to control your measurement procedure while having Excel on the screen. The left most button
is used to switch between Ocean 2014 and Excel. See topic Data link to get more information about this
window. You can also read Free workbook to see how you can use this feature in Ocean 2014.
To Next Page
Loading...
Need help?
General
