Important: Please make every effort to save the session to the correct site and room, before you
use it. Once a session is used in a certain room and on a certain tube, the equipment information is
stored in Ocean 2014 and when you move it to a new room, the equipment information from the
old room will be moved to the new room as well. The room and equipment data is used by Ocean
2014 to determine what measurements are available to you and, as a result, you may not be able to
use certain tests in the session and the test results that you get on other tests may not be
accurate.
Save as Session template
You can use Save as Session template if you want to rename an existing template or if you have a
session open that you are working on, you can use this function to save it as a template in the
Library.
Save current Test as template
You can use Save current Test as template if you want to pick out one individual test of a session or
session template and save it for future use as a test template in the Library. You can then use this
test template in other session templates as well.
Save current Checklist as template
You can use Save current Checklist as template if you want to pick out one individual checklist of a
session or session template and save it for future use as a checklist template in the Library. You can
then use this test template in other session templates as well.
Save as a Real-time display
If you use Save as a Real-time display to rename and/or change the location of a real-time display, it
will create a copy of the existing real-time display with all of its measured data and all future work will
be saved in the new copy.
Save as a Real-time display template
You can use this in two different situations:
If you use Save as a Real-time display template to rename and/or change the location of a real-
time display template, it will create a copy of the existing real-time display template (without
measured data) and all future work will be saved in the new copy at the location you chose.
You can also use this function if you are making measurements in a real-time display and want to
save the real-time display you are working on as a template (no measured data) in the Library. All
further work will be saved as a real-time display template (no measured data) in the new copy.
Save as a Test template
You can use Save as a Test template to convert a real-time display to a test template and save it in
To Next Page
Loading...
Need help?
General
