Need help?Do you have a question about the Ruckus Wireless ZoneFlex 2925 and is the answer not in the manual?
General| Model | ZoneFlex 2925 |
|---|---|
| Product Family | ZoneFlex |
| Wireless Standards | 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 300 Mbps |
| Mounting Options | Wall, Ceiling |
| Antenna Gain | 5 dBi |
| Antenna Type | Internal |
| PoE Passthrough | No |
| Indoor/Outdoor | Indoor |
| Power over Ethernet (PoE) | 802.3af |
| Weight | 0.45 kg |
| Security | WPA, WPA2, WPA3, 802.1X |
| Management | SNMP |
| Ethernet Ports | 2 x 10/100/1000Base-T |
Identifies physical features of ZoneFlex AP models.
Details the initial configuration steps before deployment.
Outlines procedures to confirm the AP is operating correctly before final deployment.
Guides on placing the AP and connecting it to power and the network.
Explains how to access and log into the AP's web-based management interface.
Covers device name, temperature updates, and service provider login changes.
Details how to view and configure the AP's network parameters like IP address.
Explains how to set up common wireless parameters applied to all WLANs.
Describes how to configure WLAN-specific settings like SSID, availability, and encryption.
Details methods for managing which stations can associate with the WLAN.
Explains how to configure virtual LAN parameters for traffic management.
Explains how to check for and apply firmware updates to the AP.
Guides on restoring the AP to its original factory settings.
To Next Page