Ruide RCS - 1. Overview; 1.1 Part Names

1
FORWORDS…………………………..........2
PRECAUTIONS……………………………2
SAFETY GUIDE……………………………2
1. OVERVIEW………………………………2
1.1 PART NAMES………………………………………..2
1.2 DISPLAY……………………………………………..3
1.3 KEYPAD……………………………………………...3
1.4 SOFT KEYS………………………………………….3
1.5 SYMBOLS & ABBREVIATION……………………....4
1.6 QUICK SETTING(☆KEY)…………………………..5
2. PREPARATION………………………….6
2.1 UNPACKING AND STORING………………………6
2.2 INSTRUMENT SETUP………………………….......6
2.3 BATTERY…………………………………………….8
2.4 REFLECTORS………………………………………8
2.5 MOUNTING AND DISMOUNTING…………………8
2.6 EYEPIECE ADJUSTMENT AND COLLIMATING OBJECT .. 9
2.7 INPUTTING MODE………………………………......9
2.8 LEVELING…………………………………………....9
3. ROUTINE MEASUREMENTS………...10
3.1 CAUTIONS FOR DISTANCE MEASUREMENT…10
3.2 EDM SETTING……………………………………..10
3.3 HOT KEY…………………………………………....11
3.4 START SURVEY…………………………………...13
3.5 ANGLE MEASUREMENT……………………….....13
4. JOB MANAGEMENT………………….15
4.1 OPEN A JOB………………………………………..15
4.2 CREATE A NEW JOB……………………………...15
4. 3 DELETE JOBS…………………………………….16
4.4 DISPLAY JOB INFORMATION…………………….16
5. KEY……………………………..17
5.1 SET UP A STATION WITH KNOWN POINTS…….17
5.2 MULTIPLE POINT RESECTION…………………..19
5.3 SET STATION DIRECTLY…………………………20
5.4 HEIGHT TRANSFER………………………………21
5.5 CHECKING AND RESETTING THE BACKSIGHT DIRECTION ... 22
6. KEY…………………………....22
6.1 STAKE OUT ANGLE AND DISTANCE……………22
6.2 COORDINATES STAKEOUT ……………………..23
6.3 PARTLINE SO …………………………………….24
6.4 REFLINE STAKEOUT……………………………...25
6.5 GUIDE LIGHT ……………………………………..25
7. KEY……………………………..26
7.1 DISTANCE OFFSETS …………………………….26
7.2 MEASURING ANGLE OFFSETS ………………...27
7.3 TWO-PRISM POLE ……………………………….27
7.4 +HA LINE …………………………………………..28
7.5 INPUT HD ………………………………………….29
7.6 CALCULATE A CORNER POINT ………………...29
7.7 COLUMN ………………………………………….30
7.8 EXTEND THE SLOPE DISTANCE ………………31
8. KEY …………………………….31
8.1 2 POINT REFLINE ………………………………...31
8.2 REFERENCE ARC ………………………………..32
8.3 REMOTE DISTANCE MEASUREMENT ………...33
8.4 REMOTE ELEVATION MEASUREMENT (REM) ..34
8.5 2-PT REFERENCE PLANE (V-PLANE) ………….35
8.6 3-PT REFERENCE PLANE (S-PLANE) ………….36
9. KEY …………………………….36
9.1 INVERSE CALCULATING ……………………….36
9.2 DIRECT AND DISTANCE (AZ&DIST) …………….37
9.3 CALCULATE AREA ………………………………..39
9.4 LINE AND OFFSET ………………………………..39
9.5 INPUT COORDINATES MANUALLY ……………..41
10. ROADS …………………………….....41
11. DATA MANAGEMENT ………………46
11.1 RAW DATA ………………………………………..46
11.2 COORDINATE DATA …………………………….47
11.3 VIEW RECORDS BY STATION ………………….47
11.4 POINT NAME LIST AND CODE LIST …………...48
11.5 DATA EXPORT AND IMPORT …………………...48
11.6 MEMORY AND FORMAT ………………………..49
12. CHECK AND ADJUSTMENT ……….49
13. SPECIFICATION ……………………..56
14. ERROR CODE LIST …………………58
【 APPENDIX-A 】 DESIGN ROAD LINE DATA ……...59
【 APPENDIX-B 】 CALCULATE ROAD ALIGNMENT ……...62