39
9.3 CALCULATE AREA
In Cogo menu press numeric key [3] to enter to
Area calculating function.
Press [Add] to add the points until you have
defined all the points in the lot
Press [Cal.] to calculate the area and girth.
Press [Next] to add points to the graph.
Press [Save] to record the area
9.4 LINE AND OFFSET
Calculate coordinates from line and offset. The line can be defined by two ways, a base point and
azimuth, or two points
9.4.1 Input AZ
In COGO menu, press [4] entering line & offset
function.
Press [1] choose Input AZ function
Input the base point and the azimuth.
Press [OK].
To Next Page
Loading...
