37
Input the two points. These points can be
input manually, or call from the internal memory or
measured on site.
Press [OK]
The azimuth, horizontal distance, and
vertical distance from the first point to the second
point are displayed. Press [Dsp] to switch between
two pages.
Second page:
Gd: Grade (HD/VD)
V%: 100/Gd
rSD: Slope distance PT1 to PT2
Press [Next] to go on PT-PT inverse.
9.1.2 3PT Angle
The 3pt angle calculates the angle between two lines defined by three points.
PT1 is the base point. Two lines are to be defined by P2 and P3, both from P1.
In Inverse menu, press [1] entering the
PT-PT function.
Input the three points
Press [OK] to display the result.
To continue 3 Pt. Angle function, press
[Next]
9.2 DIRECT AND DISTANCE (AZ&DIST)
Use angle and distance to calculate coordinate. There are two ways to calculate new points in AZ&Dist
function.
To Next Page
Loading...
