Ruide RCS - Symbols & Abbreviation

4
MSR1
Measures the distance with the mode this key has been predefined. Press it for 1
second to view and change the measuring mode.
MSR2
Measures the distance with the mode this key has been predefined. Press it for 1
second to view and change the measureing mode.
DSP
Shift the display. Press it for 1 second to launch customizing items.
ANG
Displays the angle measuring menu. Or sets the horizontal angle to zero. Or
continuous angle measuring. Or F1/F2 angle measuring. Or maintains the
horizontal angle.
Displays the Station Setup menu.
Or inputs the number 7, letter A, B, and C.
Displays the stake-out menu. Press it for 1 second to display the setting about
stake-out. Or inputs number 8, and letter D, E, F.
Displays the Offset Point Measurement menu.
Or inputs number 9, letter G,H,I.
Displays the Programs menu.
Or inputs number 4, letter J, K, L.
Displays the COGO menu.
Or inputs number 5, and letter M, N, O.
Displays RAW, XYZ, or STN data, depending on your setting.
Or inputs number 6, and letter P, Q, R.
Switch for the laser pointer. Press it for 1 second to set the function to be assigned
to this key. Or inputs number 1, and letter S, T, U.
Switch for the laser plummet. Press it for 1 second to set the function to be
assigned to this key. Or inputs number 2, and letter V, W, X.
Enter the comm parameter setting interface.
Or Inputs number 3, letter Y, Z, and Space.
Displays the HOT menu.
Or inputs – , + and ..
Displays the electric bubble.
Or inputs *, /, =, 0.
1.5 SYMBOLS & ABBREVIATION
Symbols
Symbol
Meaning
The status of
the SD card
Without SD card inserted
With SD card inserted
The working
status of the
dual-axis
compensator
The axis of X and Y direction are on
The compensator is off
The axis of X direction is on