15
3.5.4 Hold
Hold the horizontal angle reading, and rotate the instrument to the designated direction.
In Angle menu press [Lock] to enter into the
function of horizontal angle inputting.
Use the horizontal clamp screw or horizontal
tangent to sight the target.
Press [ENT] to set the horizontal angle of the
target.
4. JOB MANAGEMENT
Press [MENU] to display the MENU screen. Choose [1] to enter the job management.
4.1 OPEN A JOB
Select the item by [▲]/[▼], and then press
[ENT] to open the job.
* in front of the job means it is the current job
Program sets the job as current job, and
returns to MENU screen
4.2 CREATE A NEW JOB
Press [New] to create a new job.
Enter the new job name (within eight
characters)
Press [Setting] entering the job settings.
To Next Page
Loading...
