Ruide RCS - 9.1.2 3 PT Angle; 9.2 Direct and Distance (AZ&DIST)

34
 Sight the first point and press [MSR]. The
distance from the station point to the first point is
displayed.
 Sight the second point press [MSR], the
distances between 1
st
and 2
nd
point are displayed.
 Sight the third point and press [MSR 1]/[MSR 2],
the distances between the first and third point are
displayed.
 Repeat to measure to other points
 To record the distance and angle information
as a comment record, press [ENT] in the 1/2 or 2/2
observation screen. Default point numbers are
displayed. (STN=0, PT=1, PT=2, PT=3…), it can
be changed.
8.3.2 Mim Cont.
Measuring between the current point and the immediately preceding point, ie, the first point to the second
point, the second point to the third point, and so on.
Other operations are same as MimRadial.
8.4 REMOTE ELEVATION MEASUREMENT (REM)
1. Target Point
2. Z
3. Slope Distance
4. Base Point
AB-AC 123
SD
2.969
m
VD
4.162
m
HD
7.327
m
R.HT
1.500
m
Meas
Meas
1/2
OK
MLM 123
From
1
To
2
Back
Call
OK