60
MP,99,,20.000,3.000,6.000,
CO,Pt:100 SO deltas N: E: Z:-3.131
SO,,,1.800,1.089,5.0432,84.5528, 22:40:28,
Data of stake-out, the sequence
is: ，，， target height, slope
distance, HA, VA, time
2. COORDINATES DATA
The format of uploaded/downloaded coordinate data is determined by user‟s setting. For example: the
coordinate format is set as:
PointID, E，N，Z，Code
101,994.890,1000.964,100.113,RUIDE
102,993.936,1007.799,100.800,STN
103,998.515,1009.639,100.426,STN
104,1002.068,1002.568,100.342,STN
1001,1004.729,997.649,100.1153,PT
1002,1003.702,990.838,100.799,PT
1003,7911.990,990.358,100.403,PT
1004,997.311,998.236,100.354,PT
3. CODE LIST
The code list which is put in the code store, should be guaranteed that every line has one code which
includes serial number and code, and every line is ended by carriage returns. The format of code list is:
Serial number (quick code number), code
When there is no definition of code, the code is default as the content of serial number. In quick code
function, one can transfer code by entering serial number.
For example：
1，VEG
2，BDY
3，CL
4，ROAD
5，ROAD
6，PATH
7，DRAIN
8，CONTROL
9，DRAIN
10，UTILITY
4. HORIZONTAL LINE
The horizontal line is transmitted from computer to instrument through line element, including initial
definition. It should be included in initial definition the number of the start stake and coordinate of this point.
The line elements include point, straight, arc, and transition curve.
To Next Page
Loading...
