Web-based Configuration Guide AP Management
101
After you enable this parameter, clients associated with the Wi-Fi are isolated
from one other, and end users connected to the same AP (in the same network
segment) cannot access each other. This improves security.
After this function is enabled, 5G-capable clients select 5G Wi-Fi preferentially.
You can enable this function only when Band is set to 2.4G + 5G.
After this function is enabled, the device sends game packets preferentially,
providing more stable wireless network for games.
After this function is enabled, clients keep their IP addresses unchanged when
associating with the same Wi-Fi. This function improves the roaming experience
of users in the cross-VLAN scenario.
After this function is enabled, wireless users can have faster network access
speed and optimized network access experience.
This function is valid only on APs and routers supporting 802.11ax. Clients must
also support 802.11ax to experience high-speed network access empowered by
Wi-Fi 6. If clients do not support Wi-Fi 6, disable this function.
(2) Configuring Guest Wi-Fi
Guest Wi-Fi is a wireless network provided for guests, and is disabled by default. Client Isolation is enabled
for guest Wi-Fi by default, and it cannot be disabled. In this case, users associating with guest Wi-Fi are
mutually isolated, and they can only access the Internet through Wi-Fi. This improves network access security.
You can configure a wireless schedule for the guest network. After the specified schedule expires, the guest
network will become unreachable.
a Click Add Guest Wi-Fi.
b Set the guest SSID and password. Click Advanced Settings to configure the wireless schedule of the
guest Wi-Fi and more Wi-Fi parameters (For details, see Section 4.2 Configuring Wi-Fi.). Click Save.
Guests can access the Internet through Wi-Fi after entering the SSID and password.
To Next Page
Loading...
Need help?
General
