SABB MOTOR 2H - Oil Grades, Capacities, and Checks; Oil Grade, Capacity, and Dipping

5. CHANGING CLUTCH HOUSING OIL (at least annually):
1. Unscrew clutch housing cover (1). Hold oil
removal syringe (3) with its flexible tube
down in the clutch sump. Pump the oil out
and into an emty can.
2. If the oil is thick or dirty, wash out the
clutch housing with fuel oil and carefully
wipe dry before refilling with new oil.
3. Fill with 0.5 litre clean lubricating oil
through cover opening. Do not add extra
oil. If the clutch slips, see Item 36 tor
re clutch tension adjustment.
I
Fig. 16
Q~~.tfai
6. CHANGING REVERSE GEARBOX OIL (at least annually):
The reverse gearbox holds 0.5 litres of
lubricating oil.
, 1. Unscrew dipstick. Hold oil removal syringe
. (2) with its flexible tube passing through
the dipstick opening and down into the re-
verse gearbox sump. Pump the oil out and
into an emty cao.
. 2. The oil catl also be drained by unscrewing
the magnetic plug in the after end of the
reverse gearbox. Always remove the mag-
netic plug and clean before replacing.
.- 3. If the oil is thick or dirty, remove the gear-
e,_" box housing cover and wash out the gear-
:: box with fuel oil and carefully wipe dry
before filling with 0.5 litres of clean lubri-
cating oil by way of either gearbox housing
cover opening or dipstick opening.
Fig. 17 4. Replace dipstick.
18
. Cc
',,';;P