System Operations Page 3-
Report (F12) This button is used to output the current
screen contents to a printer attached to
the parallel printer port.
End Sequence (Esc) This button serves as an "Escape" key,
backing out of edit screens and menus.
When in standby mode, it is also terminates
calibration sequences that are under way.
Button Description
Cursor Control Buttons:
Left Arrow This button is used to move the cursor to
the left.
Right Arrow This button is used to move the cursor to
the right.
Down Arrow This button is used to move the cursor down
or to scroll down.
Up Arrow This button is used to move the cursor up
or scroll the display up. On some
occasions it may be used to move to the
previous menu item.
Edit Buttons:
DEL This is the character delete button.
INS This is the character insert button. It
toggles the edit functions between insert
mode and overtype mode.
When the edit function is in insert mode,
the INS message is displayed on the status
bar in the lower right hand portion of the
screen. Overtype mode is active when the
OVR message is displayed on the status bar.
<-BS This is the back space button.
To Next Page
Loading...
