Sagem RT3000 - Page 112

Parameters in the file para.ini: advanced configuration
SAGEM RT3000 111
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
MNP=YES
;; max. local speed: 300, 1200, 2400, 4800, 9600, 14400; default 9600
;MAX_SPEED=14400
;; max. local speed: 300, 1200, 2400, 4800, 9600, 14400; default 0 (means
300)
;MIN_SPEED=4800
;; force GSM bearer service on outgoing call: 2400, 4800, 9600; default
automatic
;GSM_SPEED=4800
;; start local modem x seconds after dialing: 0..60; default after GSM
connect
;EARLY_START_LOCAL=0
;; routing of debug output: COM; default off
;DMOD_DEBUG=COM
;DGSM_DEBUG=COM
;MNP_DEBUG=COM
;DP_DEBUG=COM
;; special numbers
DATA_NUM_1=090
DATA_NUM_2=
DATA_NUM_3=
[SPECIAL_MODEM]
; if uncommented: for SPEED_NUM GSM-speed is set as defined in
SPEED_FOR_NUM
;SPEED_NUM=090
;SPEED_FOR_NUM=4800
;SPEED_NUM_2=
;SPEED_FOR_NUM_2=
;SPEED_NUM_3=
;SPEED_FOR_NUM_3=
[AT_PARSER]
ECHO=YES
VERBOSE=YES
QUIET=NO
FLOW_CONTROL=YES
DCD_CONTROL=YES
DTR_CONTROL=YES
ANSWER_RING=0
BAUDRATE=57600
PDP_CONTEXT=1,"IP","volume.d2gprs.de","0.0.0.0",0,0
CNMI_SETTING=0,0,0,0,0
SMS_TEXT_MODE=NO