Sagem RT3000 - Configuration for Fixed Network SMS Protocol 2

Configuration
34 SAGEM RT3000
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
Example:
You have entered the SMS-Service-Centre number 0193010 in your telecomm
equipment, or this number has already been configured by factory setting. Please enter
the same number in the RT3000 as the SMS centre number:
*
5
A
CCESS
0
24
0
193010
#
8.6.3 Configuration for fixed network SMS protocol 2
If your telephone supports fixed net SMS protocol 2, please enter the following
sequence:
*
5
A
CCESS
0
27 2
#
Select Fixed net SMS
protocol 2
Your fixed network SMS telephone needs two telephone numbers to exchange SMS
with the SMS centre. One number to send SMS and one number to receive SMS.
Choose any number and configure two numbers in both, your telephone and the
RT3000. First configure the SMS centre number for sending SMS by entering the
following sequence:
*
5
A
CCESS
0
24
<SMS_
Center>
#
Enter the number of the
SMS centre to send
fixed network SMS
Meaning:
<SMS_Center> = the telephone number of the fixed network SMS centre
Then configure the SMS centre number for receiving SMS by entering the following
sequence
*
5
A
CCESS
0
26
<Local_
Number>
#
Enter the local number
configured in your
telephone to receive
fixed network SMS.
Meaning:
<Local_Number> = the telephone number configured in your telephone set, to which
the RT3000 delivers received SMS.
Default access code:
000000
Default access code:
000000
Default access code:
000000