Sagem RT3000 - Pre-Selection Configuration; International Call Prefix Settings

Parameters in the file para.ini: advanced configuration
88 SAGEM RT3000
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
16.6 Pre-Selection
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Section:
PRESELECT_HUNGARY
This section contain the special parameter for the pre-selection mode.
Activate Fixed NW
pre-selection
PRESELECT YES,NO YES
NAT_CARRIER 00 to 99 00
INTERNAT_CARRIER 00 to 99 00
KS_EX_0 00 to 99 -
KS_EX_1 00 to 99 40
KS_EX_2 00 to 99 41
KS_EX_3 00 to 99 50
KS_EX_4 00 to 99 51
KS_EX_5 00 to 99 71
KS_EX_6 00 to 99 80
KS_EX_7 00 to 99 81
KS_EX_8 00 to 99 90
KS_EX_9 00 to 99 91
KS_EX_10... KS_EX_24 00 to 99 undefined
16.7 Prefix for International calls
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
In GSM networks the “+” character is the common prefix for international calls. In
landline networks it is usually the “00”. Some countries are using different digits.
You can select with the parameter [INTERNATIONAL], which two digit prefix should be
converted into the “+” prefix.
Section: CALL_MUX
Meaning Parameter Permitted Values Factory Setting
Conversion to + INTERNATIONAL 00 to 99 00