Sagem RT3000 - Call Barring All of Outgoing (to Block All Outgoing Calls); Call Barring Incoming (to Reject All Incoming Calls)

Configuration
28 SAGEM RT3000
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
8.3.5 Call barring all of outgoing (To block all outgoing calls)
If call barring all of outgoing is activated, all outgoing calls will be blocked.
To change the setting enter the following sequence:
Description:
*33*
<password>
#
Activates for all call types
*33*
<password
*
<call_type>
#
Activates for selected call
types (see below)
#33*
<password>
#
Deactivates call barring
all of outgoing for all call
types
#33*
<password >
*
<call_type>
#
Deactivates for selected
call types (see below)
*#33#
Checks the status (see p.
30)
*#33**
<call_type>
#
Checks the status (see p.
30)
Meaning:
<password> = the password to protect this service: any number
<call_type> =
11
: Configuration is related to phone calls only.
<call_type> =
13
: Configuration is related to fax calls only.
<call_type> =
25
: Configuration is related to data calls only.
8.3.6 Call barring incoming (To reject all incoming calls)
If call barring incoming is activated, all incoming calls will be rejected.
To change the setting enter the following sequence:
Description:
*35*
<password>
#
Activates for all call types
*35*
<password >
*
<call_type>
#
Activates for selected call
types (see below)
#35*
<password>
#
Deactivates call barring
incoming for all call types
#35*
<password >
*
<call_type>
#
Deactivates for selected
call types
*#35#
Checks the status (see p.
30)
*#35**
<call_type>
#
Checks the status (see p.
30)